Majkl3D-Filaments Silk Tri-Color PLA 1.75mm 1kg | Gold-Green-Purple
Majkl3D-Filaments Silk Tri-Color PLA 1.75mm 1kg | Gold-Green-Purple
Majkl3D-Filaments Silk Tri-Color PLA 1.75mm is a three-color silky-glossy filament for striking decorative 3D printing without the need for multiple extruders.
✔️ Three colors in one strand - striking transitions without AMS mixing
✔️ Silky sheen for a premium look of prints
✔️ Easy printability of classic PLA
✔️ Nozzle temperature 190-220 °C, bed 35-60 °C
✔️ 63 mm spool - fully compatible with Bambu Lab AMS
✔️ Strong, non-brittle, smooth unwinding
✔️ 1 kg spool, 1.75 mm diameter with ±0.03 mm tolerance
✔️ Ideal for vases, figurines, decorations, and gift items Show more
Majkl3D-Filaments Silk Tri-Color PLA 1.75mm is a three-color silky-glossy filament for striking decorative 3D printing without the need for multiple extruders.
✔️ Three colors in one strand - striking transitions without AMS mixing
✔️ Silky sheen for a premium look of prints
✔️ Easy printability of classic PLA
✔️ Nozzle temperature 190-220 °C, bed 35-60 °C
✔️ 63 mm spool - fully compatible with Bambu Lab AMS
✔️ Strong, non-brittle, smooth unwinding
✔️ 1 kg spool, 1.75 mm diameter with ±0.03 mm tolerance
✔️ Ideal for vases, figurines, decorations, and gift items Show more
Product variants
Majkl3D-Filaments Silk Tri-Color PLA 1.75mm is a special three-color filament with a silky sheen that combines three shades in a single strand. The resulting prints gain striking color transitions and a metallic appearance without the need for multi-material printing or filament swaps.
Key features
Silk Tri-Color PLA is based on classic PLA material, enhanced with silk additives for a silky sheen and divided into three longitudinal color stripes. During printing, the colors blend smoothly and create unique visual effects on the surface of the model. The filament retains the easy printability of classic PLA - it does not require a heated chamber, has minimal warping, and adheres well to common print beds. The spool is 63 mm wide and is fully compatible with the Bambu Lab AMS and other automatic feeders.
Print parameters
| Parameter | Value |
|---|---|
| Filament diameter | 1.75 mm (tolerance ±0.03 mm) |
| Spool weight | 1 kg |
| Spool width | 63 mm (AMS compatible) |
| Nozzle temperature | 190-220 °C |
| Bed temperature | 35-60 °C |
| Recommended print speed | 40-100 mm/s |
| Recommended layer height | 0.12-0.28 mm |
| Cooling | 100 % |
| Drying (if needed) | 45 °C / 6-8 hours |
| Enclosed chamber | Not required |
Who is Majkl3D - Filaments Silk Tri - Color PLA 1.75mm 1kg suitable for
This filament is intended for makers who want to achieve eye-catching multi-color prints without having to use multiple extruders or an AMS system for color mixing. It is ideal for decorative items, figurines, vases, models, gift items, jewelry, ornaments, and presentation prototypes. The silky sheen and three-color transition stand out best on vase mode prints, organic shapes, and models with smooth curves. The material will be appreciated by beginners thanks to the easy printability of PLA, as well as by advanced users looking for an original visual effect.
Printing tips
- To maximize the silky sheen and color transitions, use vase mode or thin walls (1-2 perimeters).
- A lower print speed (40-60 mm/s) improves surface quality and color saturation.
- A hardened steel nozzle is not necessary, the material is not abrasive - a brass nozzle 0.4 mm or 0.6 mm is sufficient.
- For better color blending, choose a higher layer height (0.2-0.28 mm).
- Store the filament in a dry place - PLA is mildly hygroscopic; for longer storage use a dryer or a bag with silica gel.
- Before the first print, check that the end of the strand is secured in the spool's hole to prevent tangling.
- For printing on glass or a PEI sheet, a standard adhesion product or glue stick is sufficient.
