Majkl3D - Filaments PLA 1.75mm 1kg is an affordable PLA filament with an excellent price/performance ratio, designed for everyday 3D printing on FDM printers. The material is manufactured with a focus on consistent strand diameter, stable printing properties and reliable unwinding from the spool.

Key features

PLA (polylactic acid) is a thermoplastic made from renewable sources and is one of the easiest-to-print materials on the market. Majkl3D PLA is characterised by strength, minimal shrinkage and high dimensional stability. The filament is strong and not brittle, so it does not crack even during fast unwinding and does not cause print failures.

The spool is 63 mm wide and is fully compatible with the Bambu Lab AMS - it fits into the feeder like the original spool from the manufacturer. The material is tested on Bambu Lab printers with the standard PLA Basic profile, so it can be printed straight out of the box without any adjustments.

Technical parameters / specifications

Who is Majkl3D - Filaments PLA 1.75mm 1kg suitable for

This PLA filament is a suitable choice for beginners as well as experienced users looking for a reliable material for everyday printing. It is suitable for prototypes, decorations, toys, models, small functional parts, gift items and small-series production. Thanks to its easy printability and good bed adhesion, problems with warping are eliminated.

PLA has limited heat resistance (around 55-60 °C), so for parts exposed to higher temperatures we recommend choosing PETG, ASA or ABS.

Usage tips

• For the first layer we recommend a nozzle temperature around 215 °C and a bed temperature of 60 °C for better adhesion.
• Before printing, store the filament in a dry place - PLA absorbs moisture from the air, which can reduce print quality.
• If the filament has been left in the air for a long time, dry it at 45 °C for 6-8 hours.
• Use full cooling (100 %) from the second layer for sharp details and clean overhangs.
• For Bambu Lab printers the standard PLA Basic profile is sufficient without any adjustments.
• When printing at high speeds (above 200 mm/s), increase the nozzle temperature up to 220 °C.
• For smooth walls use a layer height of 0.12-0.16 mm, for faster printing 0.2-0.28 mm.