Spectrum filament Carbon PLA 1.75mm 1kg
Spectrum filament Carbon PLA 1.75mm 1kg
Spectrum PLA Carbon is a modified filament based on PLA mixed with carbon fibers, which contribute to significantly higher stiffness, hardness, and tensile strength
✔️ Higher hardness and stiffness compared to pure PLA
✔️ Good mechanical properties
✔️ Highly aesthetic, matte surface quality More
Product code: spe_0114 Transport and payment options
Spectrum PLA Carbon is a modified filament based on PLA mixed with carbon fibers, which contribute to significantly higher stiffness, hardness, and tensile strength
✔️ Higher hardness and stiffness compared to pure PLA
✔️ Good mechanical properties
✔️ Highly aesthetic, matte surface quality More
Product code: spe_0114 Transport and payment options
Hodnocení produktu
PLA Carbon is a modified filament based on PLA mixed with carbon fibers, which contribute to significantly higher stiffness, hardness, and tensile strength, while maintaining low shrinkage and very good adhesion to construction platforms typical for pure PLA. By adding 10% carbon fibers, it allows for obtaining matte surfaces of printed objects, which significantly improves the aesthetic properties of printed objects.
Tip: Due to the substantial content of crushed carbon fire, it is recommended to use nozzles with a diameter exceeding the standard value of 0.4 mm. The presence of carbon fibers can also cause wear on the brass nozzle, so for long-term application of PLA Carbon, it is recommended to use stainless steel nozzles.
Key properties:
✔️ Higher hardness and stiffness compared to pure PLA
✔️ Higher plasticization temperature
✔️ Better abrasion resistance
✔️ Much higher compression resistance
✔️ Good mechanical properties
✔️ Highly aesthetic, matte surface quality
✔️ No shrinkage after cooling
Filament specifications:
Filament diameter: 1.75 mm ± 0.05 mm
Density: 1.24 g/cm3
Nozzle temperature: 190-220°C
Bed temperature: 0-45°C
Printing speed: 40-70 mm/s
| Weight | 1 kg |
|---|
