Bambu Lab PLA Sparkle with spool, 1kg | Alpine Green
Bambu Lab PLA Sparkle with spool, 1kg | Alpine Green
Bambu PLA Sparkle is a strong PLA filament with a subtle sparkling effect thanks to metal particles, giving prints a premium look. It’s ideal for decorative and presentation models where surface appearance truly matters. The filament comes neatly wound on a spool for easy handling and printing.
Show more
Bambu PLA Sparkle is a strong PLA filament with a subtle sparkling effect thanks to metal particles, giving prints a premium look. It’s ideal for decorative and presentation models where surface appearance truly matters. The filament comes neatly wound on a spool for easy handling and printing.
Show more
Product variants
Endless Effects
Bambu PLA Sparkle combines the strength of standard PLA with a subtle sparkling effect thanks to metal particles in the material. The result is prints with a striking shimmering appearance that changes with light and gives models a premium decorative character.
It offers a smooth surface, elegant glossy sparkle finish, and good layer adhesion — ideal for decorative models, design objects, figurines, and presentation prints.
Recommended Compatibility
| Category | Recommended | Not Recommended |
|---|---|---|
| Build Plate | Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate | – |
| Hotend | Hotend with Hardened Steel Nozzle 0.4 mm / 0.6 mm / 0.8 mm, Hotend with Stainless Steel Nozzle 0.4 mm | Hotend with Stainless Steel Nozzle 0.2 mm |
| Glue | Bambu Liquid Glue, Glue Stick | – |
RFID Intelligent Printing
All printing parameters are embedded directly in the filament’s RFID chip, which is read through AMS (Automatic Material System).
Just load, insert, and print — no more tedious setting steps!
🟧 PRINTING TIPS
The filament is supplied dry, but it is recommended to dry it again before use (55 °C / 8 h).
Store in a dry environment, ideally below 20% RH, in a sealed container with desiccant or inside AMS.
Recommended nozzle temperature is 190–230 °C and bed temperature (with glue) 35–45 °C.
Recommended printing speed is up to 250 mm/s.
Due to the metal particle content, using a 0.2 mm nozzle is not recommended — clogging may occur.
