The Basic Starter Kit is a complete accessory package for everyone starting with 3D printing. In one box you get an adhesion spray, bed cleaner, lubricant, nozzle cleaning needles, a brass brush and flush cutters - everything you need for your first successful prints without frustration.

Complete equipment for the beginner printer

The kit was put together exactly according to what you really need right at the start. Instead of buying individual items from various e-shops, you get everything in one package at a more favorable price. The contents cover bed adhesion, mechanical maintenance, nozzle cleaning and basic filament handling.

3DLAC adhesion spray 400 ml

A proven spray that ensures perfect first layer adhesion to the print bed. It works reliably with materials such as PLA, PETG and ABS. After the print cools down, the model is easily removed and the bed only needs to be washed with water from time to time.

Isopropyl alcohol IPA 1 L

A one-liter pack of pure isopropyl alcohol for regular degreasing of the print bed. Grease from fingers is the most common cause of first layer detachment - after wiping the bed with IPA you achieve maximum adhesion. It is also suitable for cleaning the nozzle from the outside or resin residues.

Flush cutters for filament

Universal flush cutters with a sharp straight blade for a clean filament cut. A straight cut is important when feeding the filament into the extruder - an angled end increases the risk of jamming in the hotend or in the PTFE tube.

WD-40 Specialist PTFE lubricant spray 400 ml

Dry teflon lubricant for linear guides, guide rods and 3D printer axes. After the carrier evaporates, the PTFE component becomes a dry lubricating layer that does not catch dust or small debris from the filament. Regular lubrication extends the service life of the mechanics and reduces noise.

Nozzle cleaning needles 0.4 mm - 5 pcs

A set of five thin cleaning needles precisely sized for the standard nozzle diameter of 0.4 mm. Use them with a heated nozzle to release dried filament residues or a partially clogged opening. Five pieces provide a long-term supply, as the needles bend and wear over time.

Universal brass cleaning brush

Brass bristles are softer than a brass or hardened steel nozzle, so they will not scratch it during cleaning. Use the brush to wipe burnt filament residues from the outside of the nozzle while hot - that is the only way to remove them completely. An essential tool for regular hotend maintenance.

Who the kit is intended for

The kit is an ideal gift with a new 3D printer, an accessory for a student at school or for anyone who wants to save hours of searching for individual items. It covers all three pillars of successful printing: first layer adhesion, mechanical maintenance and nozzle care.

Technical parameters

Package contents

• 1× 3DLAC adhesion spray 400 ml
• 1× Isopropyl alcohol IPA 1 L
• 1× Flush cutters for filament
• 1× WD-40 Specialist PTFE lubricant spray 400 ml
• 5× Nozzle cleaning needle 0.4 mm
• 1× Universal brass cleaning brush