Filament-PM PLA+ Tasty Pack is a discounted bundle of five spools of premium PLA+ material from the Czech manufacturer Plasty Mladeč. Each spool contains 300 g of filament with a diameter of 1.75 mm, making a total of 1.5 kg of material in a single pack. It is an improved variant of classic PLA with a matte surface, better layer adhesion, and easier printing.

Key features

PLA+ (polylactic acid plus) is a modified version of standard PLA with enhanced mechanical and printing properties. The material prints at lower temperatures than regular PLA, has higher viscosity (reducing the risk of nozzle clogging), and better tolerates insufficient printer cooling in warm environments. Printed parts have a distinctive matte surface, higher impact toughness, and improved interlayer adhesion. Thanks to the lower printing temperature, the material is also suitable for bridging, printing overhangs, and use in 3D pens. The raw material comes from 100% renewable sources and the filament is wound on fully recycled spools.

Printing parameters

Who is Filament-PM PLA+ Tasty Pack for

The pack will be appreciated by users who want to have a set of different PLA+ shades on hand for quick material changes, multi-color prints, or testing color combinations. Thanks to its ease of printing, the material is suitable for both beginners and advanced printer users. It is ideal for printing decorative items, prototypes, figurines, cosplay accessories, small functional parts, models for schools or clubs, and anywhere high thermal resistance is not required. The smaller 300g spools also make it possible to use up the entire pack without leftovers or long-term storage. The material is also suitable for 3D pens.

Printing tips

• Before the first print, degrease the print bed with isopropyl alcohol for maximum adhesion.
• Start with the nozzle temperature at 205 °C and fine-tune it according to your specific printer and speed.
• Activate part cooling at 100% - your prints will have sharper details and better overhangs.
• When switching from higher-temperature materials, perform a cold pull to ensure no residue remains in the nozzle.
• Store the filament in a dry place - PLA+ absorbs moisture from the air, which results in crackling during printing and reduced surface quality.
• For better first-layer adhesion, use glue (e.g. Magigoo, 3DLAC) or a textured PEI sheet.
• Empty spools can be returned to the manufacturer as part of the recycling program.
• PLA+ has low thermal resistance (up to approx. 55 °C) - do not use it for parts exposed to higher temperatures.