Filament-PM PETG FRJet self-extinguishing | Black
Filament-PM PETG FRJet self-extinguishing | Black
Self-extinguishing PETG-based filament with flame retardant meeting the UL94 V0 safety standard - ideal for electronic parts and industrial applications.
✔️ Self-extinguishing according to UL94 V0 standard
✔️ Material base PETG + 20% flame retardant
✔️ Nozzle temperature 220 - 250 °C, bed 80 - 90 °C
✔️ Thermal resistance of finished part up to 70 °C
✔️ Good layer adhesion and dimensional stability
✔️ Suitable for electronics, enclosures and industrial parts
✔️ Diameter 1.75 mm with tolerance 0.05 mm
✔️ Drying recommended before printing 8 - 12 h at 65 °C Show more
Self-extinguishing PETG-based filament with flame retardant meeting the UL94 V0 safety standard - ideal for electronic parts and industrial applications.
✔️ Self-extinguishing according to UL94 V0 standard
✔️ Material base PETG + 20% flame retardant
✔️ Nozzle temperature 220 - 250 °C, bed 80 - 90 °C
✔️ Thermal resistance of finished part up to 70 °C
✔️ Good layer adhesion and dimensional stability
✔️ Suitable for electronics, enclosures and industrial parts
✔️ Diameter 1.75 mm with tolerance 0.05 mm
✔️ Drying recommended before printing 8 - 12 h at 65 °C Show more
Filament-PM PETG FRJet is a self-extinguishing filament based on PETG enriched with special flame retardant additives (meeting the UL94 V0 safety standard). The material is designed for printing components where fire resistance is a priority - typically for electronic parts, enclosures and industrial applications.
Key features
FRJet combines the proven properties of PETG with the safety benefit of self-extinguishing behaviour. The material contains approximately 20% flame retardant additive and meets the UL94 V0 safety standard. It offers good interlayer adhesion, dimensional stability and high thermal resistance up to 70 °C. The material does not warp during printing and the printed parts are strong and durable. This is an industrial material suitable mainly for advanced printer users and industrial applications.
Printing parameters
| Parameter | Value |
|---|---|
| Filament diameter | 1.75 mm (tolerance 0.05 mm) |
| Nozzle temperature | 220 - 250 °C |
| Heated bed temperature | 80 - 90 °C |
| Recommended print speed | 40 - 60 mm/s |
| Layer height | 0.1 - 0.25 mm |
| Thermal resistance of finished part | up to 70 °C |
| Material drying | 8 - 12 hours at 65 °C |
| Safety standard | UL94 V0 (self-extinguishing) |
| Material base | PETG + flame retardant |
Who is Filament - PM PETG FRJet self-extinguishing suitable for
The material is designed primarily for the electronics industry and applications where increased fire resistance is required. It is ideal for printing electronic enclosures, switchboards, connectors, cable holders, prototypes of electrical appliances and industrial components. Thanks to the properties of the PETG base, it retains good mechanical strength and dimensional stability. It is suitable for advanced users who need a certified self-extinguishing material for functional parts.
Printing tips
- Always dry the material for 8 - 12 hours at 65 °C before printing - the PETG base is prone to moisture absorption.
- This is a highly stringing material - we recommend careful retraction settings and possibly the use of the coasting function.
- Use a hardened steel nozzle or another wear-resistant variant for printing, as the additives may put stress on the nozzle.
- Ensure sufficient cooling, but not excessive - ideally 30 - 50% fan speed for good layer adhesion.
- Degrease the print bed with isopropyl alcohol before printing for maximum first layer adhesion.
- Ensure good ventilation of the working area during printing.
- We recommend downloading print profiles directly from the manufacturer and adapting them to your specific printer.
