Original mounting plate for four printheads for the large-format Elegoo OrangeStorm Giga 3D printer. This replacement/upgrade part with precisely machined holes and mounting points allows simultaneous attachment of up to four hotends on a single carriage, opening the way to IDEX-like workflows, parallel printing of identical models or multi-material configurations. Original Elegoo part No. 50.204.0102.

Original Elegoo part for OrangeStorm Giga

This is an original spare part directly from the manufacturer Elegoo with Mfg part No. 50.204.0102 and EAN 6932704906750. The part is designed specifically for the large-format OrangeStorm Giga printer - the dimensions, hole spacing and positions of the mounting points exactly match the factory carriage, so there is no need to machine, drill or fine-tune anything.

Up to four printheads on one carriage

The plate has been designed to hold four independent printheads on a single shared carrier. This opens up interesting possibilities: parallel printing of four identical copies of a model, IDEX-like mode with independent heads, or multi-material setups where each head runs a different filament (e.g. a combination of PLA, PETG and a soluble support).

Precise CNC-machined geometry

The holes and mounting spacings are cut into the plate with tolerances that ensure all four heads lie in the same plane and at the same Z height. This is absolutely essential for reliable multi-tool printing - even tenths of a millimeter difference between nozzles cause under-extrusion or scratching of the first layer.

Robust construction for large-format printing

The OrangeStorm Giga is a massive machine with a build volume over 800 mm, where the printhead travels hundreds of meters during a single job. The plate is therefore dimensioned for long-term load, vibrations from acceleration and the weight of four hotends including heatsinks and fans, without any deflection or geometry misalignment.

Compatibility with original hotends

The plate is primarily intended for original OrangeStorm Giga hotends, but thanks to standard spacings you can also use it as a base for your own hot-end upgrades. Remember that each hotend will need its own nozzle matching the chosen material - from standard brass to hardened steel for carbon-filled filaments.

Suitable for demanding materials

With a quad-printhead configuration, you can dedicate one head to a rigid material such as ABS, ASA, Nylon or polycarbonate, another to soluble support, and the remaining two for example to color variants or flexible filaments. The large-format OrangeStorm Giga frame can handle even long technical prints without warping.

Easy replacement and installation

The plate is mounted on the printer's original carriage using standard screws - no firmware modification or mechanical frame adjustment is required. Any user who has ever disassembled a hotend or replaced a fan can complete the procedure within tens of minutes. Before installation, we recommend checking the planarity of the plate relative to the print bed.

Technical parameters

Package contents

1x Elegoo OrangeStorm Giga Quad Printhead Mounting Plate (original mounting plate for four printheads, Mfg part No. 50.204.0102).