The Creality UW-03 is a 2-in-1 washing and curing station designed for post-processing prints from all common SLA/LCD/DLP printers. It combines thorough washing of uncured resin in a sealed container with subsequent UV curing in one compact unit, saving you workshop space and the time needed to finish your models.

Universal 2-in-1 post-processing solution

The UW-03 combines two key operations that follow resin printing - washing and curing - in a single device. There is no need to buy two separate stations or transfer wet models between machines. Switching between modes is done with a single rotary knob, and swapping the adapter for the given mode takes just a few seconds.

Generous working space for most SLA printers

The internal washing chamber holds up to 4.5 liters of cleaning medium and easily accommodates models from common 8.9" to 10" LCD printers. Thanks to this, the station is compatible with the vast majority of machines from Creality, Anycubic, Elegoo, and other manufacturers using mainstream formats.

Efficient washing system with vortex flow

A powerful pump creates an intense vortex inside the chamber, driving isopropyl alcohol or water-washable cleaning fluid even into the smallest cavities and recesses of the model. Uncured resin is reliably washed away from the surface and fine details without any need for manual brushing.

360° UV curing for a uniform result

In curing mode, a strip of 405 nm UV LEDs provides uniform illumination of the model from all sides. The rotating turntable smoothly spins the model during the cycle, so even intricate parts achieve the same hardness across the entire surface without weak spots or sticky areas.

Enclosed design and eye protection

The semi-transparent orange cover filters out the UV component of the light, preventing eye strain during curing and stopping any resin residues in the surrounding area from prematurely hardening. The cover also keeps the smell of isopropyl alcohol inside the chamber - especially valuable if you work in a living space or a small workshop.

Simple single-knob control

Setting the washing and curing time is handled via a single rotary controller with LED indicators. There is no complicated menu and no touchscreen that could stop responding over time. Turn it on, set the minutes, close the cover, and go do something useful.

Compatibility with common cleaning media

The station works with isopropyl alcohol (IPA), ethanol, and water-based water-washable cleaners. The choice of medium depends on the type of resin - for standard resins we recommend IPA or a dedicated resin cleaner, while water-washable resins can be cleaned with plain water.

The ideal complement to an SLA workflow

Post-processing is a step that beginners often overlook, yet it directly determines the final quality and mechanical durability of the print. The UW-03 makes this step as simple as possible and delivers repeatable results. If you are adding an FDM workstation alongside SLA, also check out our PLA, PETG, and ABS filament categories.

Technical parameters

Parameter	Value
Model	Creality UW-03
Manufacturer	Creality
Device type	2-in-1 washing and curing station
UV LED wavelength	405 nm
Washing chamber capacity	up to 4.5 l
Compatible media	IPA, ethanol, water-washable cleaner
Compatible resins	standard, water-washable, tough, ABS-like
Suitable for printers	SLA/LCD/DLP up to approx. 10" format
Controls	rotary knob with LED indication
Cover	orange UV-filtering
Power supply	mains adapter
EAN	6971636401049

Package contents

• 1x Creality UW-03 washing and curing station
• Washing chamber
• Curing adapter with rotating platform
• UV-filtering cover
• Mains adapter
• Documentation