Creality Space π V2 Filament Dryer
Creality Space π V2 Filament Dryer
Active filament dryer Creality Space π V2 with hot air circulation, capacity for 2 spools and direct feeding into the printer.
✔️ Temperature range 35-75 °C for all common and technical materials
✔️ Capacity 1x 1 kg spool
✔️ PTC heating with 360° air circulation
✔️ Preset profiles for PLA, PETG, ABS, ASA, Nylon, TPU
✔️ Built-in hygrometer for humidity monitoring
✔️ Two PTFE outputs for printing directly from the dryer
✔️ Colour touchscreen display with 0-48 h timer Show more
Active filament dryer Creality Space π V2 with hot air circulation, capacity for 2 spools and direct feeding into the printer.
✔️ Temperature range 35-75 °C for all common and technical materials
✔️ Capacity 1x 1 kg spool
✔️ PTC heating with 360° air circulation
✔️ Preset profiles for PLA, PETG, ABS, ASA, Nylon, TPU
✔️ Built-in hygrometer for humidity monitoring
✔️ Two PTFE outputs for printing directly from the dryer
✔️ Colour touchscreen display with 0-48 h timer Show more
Product variants
The Creality Space π V2 is an active filament dryer with hot air circulation, precise temperature control up to 75 °C and capacity for up to 2 spools simultaneously. It solves the most common FDM printing problem - moisture absorbed by hygroscopic materials like PETG, ASA, Nylon or TPU, which causes bubbles, cracking and weak interlayer bonds.
Drying two spools at once

The spacious chamber holds standard 1 kg spools. You save time and desk space - instead of two separate dryers, one is enough. Suitable for workshops that cycle through multiple materials at once, as well as for simultaneously drying different colours before multi-material printing.
PTC heating with 360° air circulation

An internal fan distributes hot air evenly around the entire spool. Unlike passive boxes with silica gel, the PTC heating element can actually remove moisture from the core of the spool, not just from the surrounding air. Temperature is regulated within a range of 35-75 °C in 5 °C increments, covering all common materials from PLA to polycarbonate.
Preset profiles for every material

On the touchscreen display, you select the filament type and the dryer automatically sets the optimal temperature and time. Profiles are available for PLA, PETG, ABS, ASA, Nylon, TPU and more. A user mode allows manual parameter adjustment if you're working with a more exotic material.
Direct filament feeding into the printer

Two output ports with PTFE bowdens allow you to print directly from the dryer. The filament is thus constantly in a warm and dry environment, which is crucial especially for nylon and polycarbonate, which absorb airborne moisture within a few hours. This eliminates the risk of dried material becoming moist again before it reaches the nozzle.
Hygrometer and real-time humidity monitoring

A built-in sensor measures the humidity inside the chamber and displays it on the screen. This way you can see how drying is progressing and recognise when the material is truly dry. End the drying cycle by timer, but with real feedback - no need to guess.
Compatibility with carbon and composite filaments

The temperature range up to 75 °C reliably handles even demanding technical materials. An ideal partner for printing with carbon composites, flexible TPUs and engineering plastics, which must be perfectly dried before printing to achieve their full mechanical properties.
Quiet operation and low power consumption

The dryer runs quietly enough that it won't bother you in a workroom or bedroom. The efficient PTC element consumes only as much energy as needed to maintain the set temperature, so long drying cycles won't strain your electricity bill.
Technical specifications
| Parameter | Value |
|---|---|
| Model | Creality Space π V2 |
| Capacity | 1x 1 kg spool |
| Temperature range | 35-75 °C (5 °C step) |
| Heating type | PTC with hot air circulation |
| Timer | 0-48 hours |
| Display | Colour touchscreen |
| Humidity measurement | Yes, integrated sensor |
| Output ports | 2x PTFE bowden |
| Power supply | 100-240 V AC |
| Power consumption | 150 W |
| Compatibility | PLA, PETG, ABS, ASA, TPU, PA, PC, PVA, composites |
Package contents
- Creality Space π V2 filament dryer
- 2x PTFE tube for direct feeding
- Power cable
- Spool holders
- User manual
18F, JinXiuHongDu Building, Meilong Blvd., Longhua Dist., Shenzhen, China 518131
sale@creality3dofficial.com
Wandsbeker Allee 77, 22041 Hamburg, Germany
store.eu@creality.com









