High-temperature reusable spool for refill filaments. Used only once, without the original box, undamaged.

Specifications:

• Material: ABS
• Heat resistance: ≤70 ℃
• Package size: 200 × 200 × 67 mm
• Weight: 250 g
• Filament compatibility: PLA, PETG, ABS, ASA, PA6-GF, ABS-GF, PAHT-CF, PET-CF, PA6-CF, PC, TPU

Instructions for the printed spool:

After printing, you will have one wide piece (1×), one narrow piece (1×), and two spacer washers (2×).

Find the locator (small block on the wide piece). Align it with the notch on the inner ring of the filament spool. Insert the wide piece into the filament roll.

Step 1: Insert the narrow piece and align the grooves of both parts inside the spool until it is firmly pressed into the wide piece.

Step 2: Once firmly inserted into the wide piece, rotate the narrow piece clockwise until it locks into place and you hear it click.

Step 1: Make sure the spacer washer is installed inside the spool (under the triangle).

Step 2: Tear off and remove the plastic strips.

The photo is for illustrative purposes only. This is an alternative version that is fully compatible with filaments from Bambu Lab.