Bambu Lab H3C Combo
Bambu Lab H3C Combo
Flagship multi-material 3D printer with the Swaptek tool changer, 9 PrintTools and a fully enclosed AMS 3H. Prints up to 9 materials in a single model, including soft TPU 75A and engineering filaments.
✔️ Build volume 330 × 320 × 325 mm
✔️ 9 independent PrintTools with swaps from 3.4 s (new material within 6 s)
✔️ Hardened steel nozzles up to 350 °C and actively heated chamber up to 65 °C
✔️ FlexFeed extruder - soft TPU 75A up to 3× faster, supports 1.75 and 2.85 mm
✔️ AMS 3H with 9 slots, built-in 85 °C dryer for PA, PC and CF composites
✔️ Mixed nozzle sizes (0.2 and 0.4 mm) in a single print
✔️ Travel speed 1,400 mm/s, acceleration 25,000 mm/s²
✔️ Full-Auto calibration, AI monitoring and HMS with MiniWiki on the display Show more
Flagship multi-material 3D printer with the Swaptek tool changer, 9 PrintTools and a fully enclosed AMS 3H. Prints up to 9 materials in a single model, including soft TPU 75A and engineering filaments.
✔️ Build volume 330 × 320 × 325 mm
✔️ 9 independent PrintTools with swaps from 3.4 s (new material within 6 s)
✔️ Hardened steel nozzles up to 350 °C and actively heated chamber up to 65 °C
✔️ FlexFeed extruder - soft TPU 75A up to 3× faster, supports 1.75 and 2.85 mm
✔️ AMS 3H with 9 slots, built-in 85 °C dryer for PA, PC and CF composites
✔️ Mixed nozzle sizes (0.2 and 0.4 mm) in a single print
✔️ Travel speed 1,400 mm/s, acceleration 25,000 mm/s²
✔️ Full-Auto calibration, AI monitoring and HMS with MiniWiki on the display Show more
The Bambu Lab H3C Combo is the flagship multi-material 3D printer with the revolutionary Swaptek tool changer, which swaps between up to 9 independent PrintTools in just 6 seconds. It offers a 330 × 320 × 325 mm build volume, an actively heated chamber up to 65 °C, nozzles up to 350 °C and an integrated filament dryer, so it handles anything from colorful PLA models to soft TPU 75A and engineering materials like PA-CF and PET-CF.
Nine materials in a single print

Nine individual PrintTools, each with its own filament path and heater, keep the material pre-heated and ready to deploy. The H3C can combine CMYKW colors for the full color spectrum, add water-soluble PVA for supports and include specialty materials like PLA Silk or Wood - all within a single print with minimal waste in the purge wipe (0.038 g per swap).
Tool change in 6 seconds (Swaptek)

Swaptek technology doesn't need to retract and reload the filament like conventional AMS systems. Tool stays docked - each tool remains in its dock, heated, with filament loaded. Thanks to Active Pre-Heat, the next nozzle heats up during the current print, so the actual swap takes 3.4 s and the new material starts extruding within 6 seconds.
Soft TPU up to 3× faster with FlexFeed

The FlexFeed extruder with cam-driven mechanics and a PMSM motor maintains precise filament tension, so soft flexible TPU 75A doesn't suffer from the buckling effect. It supports both standard 1.75 mm and dedicated 2.85 mm TPU spools, where it reaches up to 3× higher volumetric flow than conventional printers - soft shoes, watch straps or damping joints print reliably and quickly.
Mixed nozzle sizes in a single model

The H3C can carry different nozzles simultaneously - fine details are printed with a 0.2 mm nozzle, load-bearing structures with a 0.4 mm nozzle and flexible parts with a dedicated TPU nozzle. The new mixed-diameter toolpath algorithm in Bambu Studio assigns each nozzle its own layer height without having to share a single layer height. The result: sharp details where you need them and speed where it matters.
AMS 3H - fully enclosed filament management system

The integrated AMS 3H has 9 slots, keeps spools sealed against moisture, and the filament itself is detected, routed and loaded into the PrintTool - no manual loading. It also includes a built-in 2-slot dryer with temperatures up to 85 °C, which handles hygroscopic materials like PA (nylon), PC and carbon-fiber composites, even mid-print.
Nozzles up to 350 °C and 65 °C heated chamber

All nine hardened steel nozzles reach 350 °C, which opens the door to materials like ABS, ASA, PC, PA-CF or PET-CF. Active dual-zone chamber heating maintains a stable 65 °C, suppressing warping on engineering filaments. Cross-flow cooling with four cooling layers (part fan, two auxiliary, PrintTool fan, chamber fan) keeps overhangs clean even at high speeds.
Lighter print head, acceleration of 25,000 mm/s²
The toolhead and X-axis assembly are 40% lighter, which reduces inertia and enables acceleration up to 25,000 mm/s² and travel speeds up to 1,400 mm/s. The optional Vision Encoder provides an absolute optical reference and maintains motion accuracy below 50 μm across the entire build volume - ideal for small-batch production and engineering parts.
Full-Auto calibration, AI monitoring and HMS with MiniWiki
Before every print, the printer automatically calibrates the docking of all nine PrintTools, offsets for precise color alignment, and performs bed leveling. AI vision systems monitor the print from the first layer, detecting spaghetti, clogged nozzles or an overloaded purge bin. The new HMS with MiniWiki shows the cause of the error directly on the printer's display and walks you through the fix step by step, without QR codes and searching on your phone.
Optional CutTool, DrawTool and DebossTool
Swaptek isn't limited to PrintTools only. The optional CutTool, DrawTool, DebossTool and others mount the same way and are swapped automatically. Multi-process projects (printing + cutting + drawing + embossing) can be handled in a single printer without manual swaps - one job, all processes, hands-off.
Technical specifications
| Parameter | Value |
|---|---|
| Build volume | 330 × 320 × 325 mm |
| Number of PrintTools | 9 (independent filament paths) |
| Tool change | from 3.4 s (new material within 6 s) |
| Nozzle temperature | up to 350 °C (hardened steel) |
| Chamber temperature (active heating) | up to 65 °C |
| Build plate | textured PEI |
| Max. travel speed | 1,400 mm/s |
| Max. acceleration | 25,000 mm/s² |
| Motion accuracy (with Vision Encoder) | below 50 μm |
| Filament diameter | 1.75 mm and 2.85 mm (FlexFeed) |
| AMS 3H | 9 slots + 2-slot dryer 85 °C |
| Expansion with more AMS | up to 24 spools via PrintTool No. 1 |
| Printer dimensions | 493 × 571 × 587 mm |
| AMS 3H dimensions | 480 × 562 × 460 mm |
| Assembly dimensions (printer + AMS) | 493 × 571 × 1016 mm |
| Assembly weight | 36.28 kg |
| Connectivity | Wi-Fi, LAN, Bambu Bus |
| Software | Bambu Studio, Bambu Handy |
What's in the box
- Bambu Lab H3C
- Bambu Lab AMS 3H
- Printer power cord
- Dryer Module Power Cord
- Bambu Bus Cable 6-pin
- Textured PEI Build Plate
- 8× PrintTool 0.4 mm (for 1.75 mm filament)
- 1× PrintTool 0.4 mm (for 2.85 mm filament)
- Accessories Box
Room 201, Building A, No. 1 First Qianwan Road, Qianhai Shengang Cooperation Zone, Shenzhen
contact@bambulab.com
Hanauer Landstraße 291b, 60314 Frankfurt am Main 60314 Frankfurt am Main Hanauer Landstrasse 291.
contact@bambulab.com





