The Anycubic Wash & Cure 3.0 Plus is a large-capacity washing and curing station in one, designed for post-processing of oversized resin prints. With a working zone of 190 mm in diameter and up to 245 mm in height, it can handle models from Photon M3 Plus, M3 Max or Mono X 6K printers without the need to split them into parts. The combination of 360° curing and effective washing shortens finishing work to just a few minutes.

Large-capacity working area

The enlarged washing basket accommodates models up to 192 × 120 × 245 mm and the rotating platform allows curing prints up to 190 mm in diameter and 245 mm in height. Finally, prints from Photon Mono M5s Pro or M3 Max fit without compromise. If you deal with quality resin printers and accessories, this is a logical step for serial producers.

Dual-wavelength UV LED technology 365 + 405 nm

The curing ring contains alternating LED diodes with two wavelengths - 365 nm and 405 nm. This combination better covers the spectrum of commonly used resins (standard, tough, ABS-like, water-washable) and ensures uniform curing with no sticky spots.

360° reflective chamber

The chamber interior is lined with mirror panels that reflect UV light onto the model from all sides. Combined with the 360° rotating platform, you achieve uniform curing even on complex geometries - no shaded areas, no need to manually rotate the part.

Two washing modes

The device offers a basket washing mode for small and medium-sized models and a direct wash mode, where you hang the entire build plate with the print into the tank. The circulating stream of isopropyl alcohol or ethanol reliably removes residual resin even from fine details.

Protective UV cover

The transparent orange cover blocks UV radiation and protects the operator's eyes during curing. At the same time, it serves as a sealing element during washing, so that IPA fumes do not escape into the surroundings. The cover can be easily removed with one hand.

Clear controls with timer

The front panel features a rotary knob for setting the time (0-30 min for washing, 0-60 min for curing) and a mode switch. The washing motor and the curing module have separate controls, so the station can be used as a pure washer or a pure UV chamber.

Quiet operation and robust construction

The metal arm for hanging the build plate withstands even heavier models made from ABS-like resins. Operating noise remains low even at maximum stirring speed, so the station is unobtrusive in a home workshop or small office.

Package contents

• Anycubic Wash & Cure 3.0 Plus (main unit)
• UV protective cover
• Wash tank
• Wash basket
• Rotating curing platform
• Build plate holder for direct wash mode
• Power adapter
• Manual and warranty card