Anycubic UV Resin Standard, 1kg | černá
Anycubic UV Resin Standard, 1kg | černá
Photopolymer UV resin for LCD, DLP and MSLA 3D printers with a 405 nm wavelength, offering fine details and reliable curing.
✔️ For LCD / DLP / MSLA printers (405 nm)
✔️ Low shrinkage and good dimensional stability
✔️ High detail fidelity and smooth surface
✔️ Fast curing, shorter print time
✔️ Hardness approx. 79 Shore D, strength 35-55 MPa
✔️ Suitable for figurines, miniatures, prototypes and jewellery models
✔️ 1 kg package, easy to pour into the vat
✔️ Easy to sand and paint after curing Show more
Photopolymer UV resin for LCD, DLP and MSLA 3D printers with a 405 nm wavelength, offering fine details and reliable curing.
✔️ For LCD / DLP / MSLA printers (405 nm)
✔️ Low shrinkage and good dimensional stability
✔️ High detail fidelity and smooth surface
✔️ Fast curing, shorter print time
✔️ Hardness approx. 79 Shore D, strength 35-55 MPa
✔️ Suitable for figurines, miniatures, prototypes and jewellery models
✔️ 1 kg package, easy to pour into the vat
✔️ Easy to sand and paint after curing Show more
Product variants
Anycubic UV Resin Standard is a photopolymer resin designed for LCD, DLP and MSLA 3D printers. It offers fine details, a smooth surface and reliable curing under UV light at a wavelength of 405 nm.
Key features
The Anycubic Standard UV resin is formulated for general modelling and prototyping use. It excels with low shrinkage, good dimensional stability and high detail fidelity, thanks to which it preserves even the smallest features of a model. Once cured, the material is strong, moderately rigid and easy to work with - it can be sanded, drilled and painted. The resin has a low odour within the category of standard resins and is characterised by fast curing, which shortens the print time of individual layers.
Technical parameters / specifications
| Parameter | Value |
|---|---|
| Material type | UV photopolymer resin |
| UV wavelength | 405 nm |
| Recommended technology | LCD / MSLA / DLP |
| Layer height | 0.025 - 0.1 mm |
| Exposure time (normal layer) | 1.5 - 3 s (depending on printer) |
| Exposure time (bottom layers) | 20 - 40 s |
| Viscosity | 150 - 200 mPa·s at 25 °C |
| Hardness (Shore D) | approx. 79 |
| Tensile strength | approx. 35 - 55 MPa |
| Elongation at break | approx. 8 - 12 % |
| Storage temperature | 5 - 35 °C, away from direct light |
| Package weight | 1 kg |
Who is Anycubic UV Resin Standard, 1kg suitable for
This resin is suitable for printing models with high detail requirements - figurines, miniatures, gaming models, prototypes, decorative items, jewellery patterns or design products. Thanks to its universal formulation, it is suitable both for beginners looking for a reliable starter material and for advanced users of LCD/DLP printers. Cured models have a smooth surface that is ideal for further finishing - sanding, priming and painting. Looking for alternative materials for classic FDM printing? Check out PLA, PETG or ABS filaments.
Tips for use
- Before printing, shake or stir the resin thoroughly in the bottle for about 1 minute.
- Work in a well-ventilated room and always wear nitrile gloves and safety glasses.
- The recommended printer and room temperature is 20 - 30 °C - increase the exposure time at lower temperatures.
- After the print is finished, wash the models in isopropyl alcohol (IPA, ≥ 95 %) for 3 - 5 minutes.
- Post-cure in a UV chamber (405 nm) for 2 - 6 minutes depending on the model size.
- Filter the remaining resin from the vat through a paper filter to avoid impurities in the next print.
- Do not store the resin in direct sunlight - there is a risk of premature polymerisation.
- For finer details use a layer height of 0.025 - 0.05 mm; for faster printing 0.05 - 0.1 mm.
Longcheng Avenue, Vanke Times Square, 3B Office Building 85 518172 Shenzhen China
official@anycubic.com
