Anycubic ABS-Like Resin Pro 2, 1kg | Černá
Anycubic ABS-Like Resin Pro 2, 1kg | Černá
Anycubic ABS-Like Resin Pro 2 is a 1 kg UV photopolymer resin mimicking ABS plastic - strong, hard, and dimensionally stable for SLA/DLP/LCD 3D printers.
✔️ ABS-like properties - high strength and stiffness of prints
✔️ Hardness 84D (Shore D), density 1.1 g/cm³
✔️ Reduced odor compared to previous generations
✔️ Curing wavelength 365 - 410 nm (optimum 405 nm)
✔️ Compatible with SLA, DLP, and LCD printers
✔️ Suitable for functional prototypes, structural parts, and molds
✔️ Stable under various climatic conditions, easy to store
✔️ 1 kg package, recommended printing temperature 20 - 25 °C Show more
Anycubic ABS-Like Resin Pro 2 is a 1 kg UV photopolymer resin mimicking ABS plastic - strong, hard, and dimensionally stable for SLA/DLP/LCD 3D printers.
✔️ ABS-like properties - high strength and stiffness of prints
✔️ Hardness 84D (Shore D), density 1.1 g/cm³
✔️ Reduced odor compared to previous generations
✔️ Curing wavelength 365 - 410 nm (optimum 405 nm)
✔️ Compatible with SLA, DLP, and LCD printers
✔️ Suitable for functional prototypes, structural parts, and molds
✔️ Stable under various climatic conditions, easy to store
✔️ 1 kg package, recommended printing temperature 20 - 25 °C Show more
Product variants
Anycubic ABS - Like Resin Pro 2, 1kg is a 1 kg UV photopolymer resin that mimics the properties of ABS plastic. It offers high strength, stiffness, and dimensional stability, making it suitable for functional prototypes and structural parts printed on SLA, DLP, and LCD (mSLA) 3D printers.
Key features
This is an improved generation of the popular Anycubic resin with reduced odor compared to previous versions. Cured prints exhibit high surface hardness (84D on the Shore scale), good toughness, and resistance to mechanical stress. The resin is stable under various climatic conditions, resistant to moisture degradation, and suitable for long-term storage. Broad compatibility covers wavelengths of 365 - 410 nm, ensuring usability on the vast majority of current SLA/DLP/LCD printers.
Technical parameters / specifications
| Parameter | Value |
|---|---|
| Resin type | ABS-like, UV photopolymer |
| Curing wavelength | 365 - 410 nm (optimum 405 nm) |
| Density | 1.1 g/cm³ |
| Hardness (Shore D) | 84D |
| Weight (without packaging) | 1 kg |
| Recommended printing temperature | 20 - 25 °C |
| Storage temperature | 15 - 35 °C |
| Recommended layer height | 0.025 - 0.1 mm |
| Layer exposure time (approx.) | 1.5 - 3 s (depending on printer and LCD) |
| Bottom exposure (approx.) | 25 - 40 s |
| Compatibility | SLA, DLP, LCD (mSLA) |
Who is Anycubic ABS - Like Resin Pro 2, 1kg suitable for
This resin is suitable for printing functional prototypes, structural parts, consumer electronics enclosures, snap-fit joints, jigs and fixtures for production, as well as master models for silicone molds. Thanks to its strength and hardness, it excels in applications where standard resins fail due to brittleness. The material is appreciated by users looking for a mechanically durable output with ABS-like characteristics without the need for FDM printing. You can find more about materials in the ABS section.
Tips for use
- Shake the bottle thoroughly before each use to ensure the contents are properly mixed.
- Print at room temperature of 20 - 25 °C; at lower temperatures, extend the exposure times.
- Always wear protective gloves, goggles, and a respirator, and work in a well-ventilated room.
- After printing, wash the print in isopropyl alcohol (IPA) and then post-cure with 405 nm UV light.
- Perform post-curing gradually - short intervals reduce the risk of microcracks in thick-walled parts.
- Store the resin in its original bottle away from direct sunlight and out of reach of children.
- Filter unused resin from the vat (e.g., with a paper filter) back into the bottle - this extends its shelf life.
- In case of skin contact, immediately rinse with plenty of water and soap.
