3DLAC Plus is an improved version of the proven 3DLAC adhesive spray, used by thousands of printers around the world. In a 100ml package, it offers even stronger fixation of first layers to the print bed - and with less material used. It works reliably on both heated and unheated beds and is compatible with virtually all common filaments, from PLA through PETG to ABS.

Stronger fixation with lower consumption

The Plus version is the result of the latest development from the 3DLAC brand. Compared to the classic spray, it holds the first layer more firmly, so it's enough to apply a thinner layer and the print won't move anywhere. An ideal solution for long prints, warping materials, or large surfaces where adhesion is critical.

Universal use on all print beds

The spray works on heated beds (glass, PEI, garolite, ceramic) as well as on unheated surfaces. It creates an even film that holds the model in place during printing, and once the bed cools down, the print peels off easily.

Compatibility with most filaments

It easily handles fixation for PLA, PETG, ABS, ASA, Nylon, polycarbonate, and carbon composites. It has also proven itself with more problematic materials that tend to warp.

Practical 100 ml volume

The smaller 100 ml format is ideal for occasional application and easy storage next to the printer. Thanks to the higher concentration of the active ingredient, even this package lasts for dozens of prints - just a really thin layer is enough.

Simple spray application

Just apply the spray from a distance of approximately 15-20 cm onto a cold bed, let it dry for a few seconds, and start printing. It leaves no greasy marks, and after printing, any residue can be easily washed off with water or a lightly damp cloth.

Proven 3DLAC brand

3DLAC is a Spanish specialist in adhesives for 3D printing. The product is developed and manufactured by Laboratorios 3D Print, S.L. directly in Spain. It is one of the most widely used adhesives in the FDM printing community.

Technical parameters

Package contents

1x 3DLAC Plus adhesive spray in a 100 ml pressurized can with an application nozzle.