The Basic 3D pen with LCD display is your gateway to the world of 3D printing for both children and adult makers. It draws directly into the air, works with standard 1.75mm PLA and ABS filaments, and thanks to the clear LCD display you always have the nozzle temperature and selected material type under control. It is ideal for quick print repairs, joining parts, and free-form spatial creation.

Key features

The 3D pen works on the same principle as a classic FDM printer - it melts a thermoplastic filament and extrudes it through a nozzle. However, instead of motorised feeding, movement is controlled by your hand, so you can draw directly into space, connect prints, or repair broken models within seconds.

The integrated LCD display shows the current nozzle temperature and the selected filament type. Switching between modes for PLA and ABS is a matter of a single button, so you can easily switch from softer to stronger material depending on what you are currently creating.

The pen accepts standard 1.75 mm filament, so you are not dependent on expensive proprietary cartridges. You can use regular spools from our range of PLA filaments and ABS filaments, or leftover spools from your printer.

Side buttons control filament feed and retraction. The extrusion speed can be smoothly adjusted, which you will appreciate when drawing thin lines as well as filling larger areas. The body of the pen is shaped to fit comfortably in your hand during longer drawing sessions - the low weight and balanced centre of gravity minimise wrist fatigue.

Power is supplied via the included USB cable, so you can connect the pen to a power bank, laptop, or a standard USB adapter. No special power supply is needed, making the pen fully mobile.

Technical parameters / specifications

Parameter	Value
Product type	3D pen
Display	LCD
Compatible filaments	PLA, ABS
Filament diameter	1.75 mm
Speed control	continuous
Power supply	USB
Recommended age	from 6 years
Package dimensions	21.5 x 16.5 x 6 cm

Who is the Basic 3D pen with LCD display for

The 3D pen develops spatial imagination, fine motor skills, and creativity, making it suitable for children from six years old under adult supervision. The pen's construction protects fingers from direct contact with the heating zone, but the nozzle remains hot, so parental supervision is necessary. It also works well for adult makers looking for a quick tool for repairing prints, gluing parts from FDM printers, or adding missing details.

Usage tips

• For starters, we recommend PLA filament - it melts at a lower temperature and produces less odour.
• For stronger and more heat-resistant items, switch to the mode for ABS filament.
• When changing material or colour, use the retraction function and wait until the nozzle heats up to the new temperature.
• Draw thin lines slowly, larger areas faster, so the material is applied evenly.
• Always place the pen in the included stand during breaks, as the hot nozzle could damage the work surface.
• For mobile use, simply connect the pen via USB to a power bank with sufficient output.